Version: 1.2.12
Date: 12/16/19
Invoice History:
Added an additional column to the Invoice History screen. You can now click on the columns and add the column Work Date. This specifies when the work was performed.
Version: 1.2.11
Date: 12/06/19
Survey Screen:
Fixed a survey bug, that when you made a violation active and then tested it, the screen would process endlessly if the device did not match a device on the Hazard Listing screen.
Facility Screen:
Fixed the layout order of the Facility screen.
Version: 1.2.10
Date: 09/26/19
Facility Screen:
Added a paperless choices section. The facility can choose to get email notices, invoices, and to enter an email specifically for these notifications. This is in preparation for an email coming soon.
Fixed the facility screen to adapt for different size screens and fit on the iPad screen.
Fixed the field sizes for the contact information.
Moved the Open Survey and Map This Facility buttons to the top of the screen.
The hazard screen will now also adapt to different size screens.
Version: 1.2.9
Date: 09/10/19
Fixed the bug on the Survey Violations - Proposed Devices grid where the delete button did not always delete the violation you selected. When this happened the violations were removed from the grid, but not truly deleted, which resulted in not being able to save the survey.
Version: 1.2.8
Date: 09/09/19
Added a new price feature. Per the client’s request, we can now charge different prices based on a facility’s facility type. i.e Residential or municipal could be charged different prices for a test than commercial facilities.
Added a few small changes including:
Made type filterable on the Facility Listing screen
Modified adding a device so the work in the Control Panel now gets the zone. This was changed for adding a device from Hazard, Hazard Listing, or during a Survey.
Version: 1.2.7
Date: 08/29/19
The major change in this release is how notices work in the software. The way notices are processed has been completely restructured. This will make notice printing and re-printing much faster. The restrictions on printing less than 50 notices at a time have been removed.
A few small changes:
- Modified the column label on the ctrl panel from hazard level to device hazard level to make this column's contents more clear.
- Added new reports to the W & S Dashboard called Work State.
Version: 1.2.6
Date: 08/04/19
Squashed lot of bugs, including:
last survey date being the same as the next date, hazard listing overpopulating with devices, and invoice export summary not including data for the end date or allowing for time zone.
Test Screens:
Added a new feature where if a device test has been completed for today and you test it again, the software will warn you and ask if you want to save another test.
Version: 1.2.5.1
Date: 07/10/19
Test Screens:
Fixed a bug where the control panel data, i.e. the due date, for tests was not loading properly to the db.
Version: 1.2.5
Date: 07/07/19
Survey:
When adding a proposed violation, on the existing hazard screen, if there is an active device, you are asked if you want to make the other device inactive. If you did, this was not loading an entry to the new Device history table. This has now been added.
When you edit a proposed device from the Violations grid on the Survey screen and make it active, the software will now ask you if you would like to test the device.
Modified the violation grid to not share a store. This will fix the issue of the grid occasionally showing violations unrelated to this survey and related to the last survey performed.
Hazard:
On the Hazard screen when you made a device removed, replaced, or inactive, the grid on the Hazard Listing screen would become populated with devices that were not in this facility. This has been fixed.
Control Panel:
Added Hazard level to the Control Panel. When you change the hazard or add a device the Hazard Level will be updated on the Control Panel.
During testing the Hazard level change it was discovered that if you changed Seasonal on the Hazard screen or from a Survey when adding an existing device, the Control Panel did not get updated.
W & S Dashboard:
Added a W & S Dashboard with three initial reports. Test Kits Expiring, Licenses Expiring, and Non-Compliant Work.
List of users:
Modified the list of technicians for the Billing Report, Tests Performed Report, and Surveys Performed Report. Now users in clients that W & S does the fieldwork for can see the W & S testers.
Software Functionality:
An issue was found where the software was updating a unique id in the model, and this caused the software to not be able to find the work associated with a device. This was fixed in this location and others. This may fix the occasional issue where a work date does not move forward after a test because the software has trouble finding the work
Fixed an issue where the software was loading a static id instead of the id it was supposed to load.
Version: 1.2.4
Date: 06/04/19
Test Screens:
On the test screens changed the testkit field from a text field to a pop list. This list is filled with valid (not expired) test kits from the test kit config screen. The user is now required to pick a test kit from this list every time.
Dashboard:
Added a new report to the Dashboard screen. This report with show devices that have been added, had a device state change, or device SN or barcode change.
Version: 1.2.3.18
Date: 05/29/19
Control Panel:
The last survey date is now set when a survey is performed similarly to the last test date. This is displayed on the control panel. The grid column name has been changed from the Last Test Date to Last Work Date.
Notice History:
The Notice History grid now displays in descending order, newest to oldest. The grid also now includes the test result column and test device SN column.
Facility:
Fixed an issue with the recent Facility screen change where a pop box would pop if you made the facility inactive. The box was also popping every time you opened an inactive facility.
Test Screens:
Turned back on the logging of basic test information whenever a test is completed. To not increase the effort on the software throughout a day, this data is sent on load.
Changed the Meter Reading field on the DCVA and RPZ Test forms, for a specific client only, to be string field and not a number field. The input is forced to be numbers. This was done to retain the leading zeros on the data.
Data collection:
Increased the amount of history the software logs for a device. Now data is logged whenever a device is added, the device state is modified, and the device barcode or SN is changed.
Version: 1.2.3.17
Date: 05/09/19
Test Kit Screen:
Fixed an issue with the new Test Kit add feature not saving all the data correctly.
RPZ test screen:
The meter reading field on the RPZ test screen, for a specific client, was made wider so the numbers would fit and be visible.
Facility Screen:
Added a new button to the Facility screen, called Open Survey. If you do not have survey work open this will open a survey tab for the current facility and move you to the survey. This does not mean the survey is due in the near future.
List of users:
Fixed an issue where the users in the list for assigning work, choosing a tester/surveyor when performing a test, and choosing techs for the billing report were not getting properly sorted after the tech license change.
Roles:
Roles are being implemented. Certain functions will now be limited based on a user’s role. The Roles screen has been modified to show the current actions and permissions available to each role. This screen is now viewable by all users. New actions will be added in the future.
Hazard Screen:
A device can now be deleted. A device cannot be deleted if it has a test. Your role must also have permission to Delete a Device.
The meter reading field, for a specific client, has been added to the Test Grid on the Hazard Screen.
Modified the test grid on the Hazard Screen. Removed a placeholder for a checkbox that we were not using.
Dashboard Screen:
A Detector Check Meter Reading Report has been added to the Dashboard screen.
Data collection:
Device History is now being collected by the software. This will record actions to devices, such as deletes.
Users Screen:
When adding a user, if the software user is a Weston & Sampson employee, the client is blanked out.
On the Users screen, a role is now required.
When you create or edit a user, the role you can choose is restricted to your role or lower.
The deletion of certain users has been restricted.
Version: 1.2.3.16
Date: 04/10/19
Software Functionality:
The way test kits are used by the software is changing. Previously test kits were added on a specific users page, and that test kit was then available only for that user. Now the test kit information will be more global. There is now a new Test Kit Screen in the Menu under Config. Here you can add, edit, and delete test kits for your use. The user screen has been changed to remove the test kit. Clients can only see their test kits. Weston & Sampson user can see all test kits. This is in preparation of allowing the user to choose their test kit at test time, from a list of valid test kits that are on the Test Kit config screen.
Facility Screen:
The layout of the facility screen has been changed from 3 columns to 2 columns for better readability on an iPad. Fields have also moved around to make adding and editing a facility easier. Also the Mail Addr Attn field has been renamed Mail Address 2.
DCVA/RPZ Test Screens:
A new field has been added to the DCVA/RPV test screens, just for a specific client, to collect detector check meter reading data.
User Screen:
On the user add screen the client is now required for all clients. Weston and Sampson employees can choose a Weston & Sampson option from the pick list now.
Hazard Screen:
An issue was found where if you loaded the software, immediately went to the cross con tab and added a facility, then went to the Hazard Listing tab and clicked Add Hazard the software would load hazards to the pop window that did not belong to this facility. This has been fixed.
Version: 1.2.3.15
Date: 03/22/19
Tests/Survey screen:
Removed an option from the manual fail list, “Under Construction”.
Facility screen:
Added a Print Survey Report button to the facility page to allow the report to open in a new browser for printing from an iPad. Also changed the name of the button Open Report to View Survey Report, to match the Hazard Screen Test buttons.
Found a small issue with the just-released feature where if you make a facility inactive the devices are also make inactive. Only the active devices should be made inactive, not the removed, replaced, or proposed devices. This is fixed.
Surveys:
Modified the way previous survey violations are loaded back to the software. Created a temporary id to match the temp hazard to the temp violation to assist in deleting violations from the software once they are resolved.
Notice Queue, Notice History, Invoice Queue, and Invoice History screens:
Added a new field above the grids on the Notice Queue, Notice History, Invoice Queue, and Invoice History screens. This new field, Count Selected, shows the number of items selected in the grid.
Notice Queue and Invoice Queue:
On the screens Notice Queue and Invoice Queue the print button is now restricted to print only less than 50 notices/invoices at a time.
Version: 1.2.3.14
Date: 03/06/19
Dashboard Screen:
Fixed the Year End Report issue for New Hampshire where the report was not opening.
Facility Screen:
Changed the software’s actions when you make a Facility Inactive. Now the devices will also be made inactive, their work removed from the Control Panel, and any notices removed. When you change Facility State to Inactive a box pops up and tells you that this action now also makes the devices inactive and cannot easily be reversed.
Hazard Listing/ Hazard/Survey Screens:
There is an issue with the new Device Add flow that was added a few weeks ago. If you want to replace a device, and edit the device and make it replaced first, then when you go to Add a device you can no longer select that hazard from the Add Device box. Any hazard with devices that are removed or replaced, will now be visible in the Add Device box. This change has also been added to a Survey, when you add a device.
Survey Screen:
Added a new question to the survey for clients in MA. There is now a new box labeled Contamination. You are required to check one of the checkboxes in this box. You cannot check None and another box. You cannot enter a type/description for a box you did not check. The text fields are limited to 50 characters.
DCVA Test Screen:
Modified the DCVA test screen so the Check Valve 1 DP and Check Valve No 2 DP fields will open the iPad keyboard with numbers visible and not the iPad keyboard with letters visible.
Software Functionality:
Fixed an issue with the API that prevented invoice create data from loading from an iPad, because of data already in the database.
Collecting additional data when the user logs in to allow awareness, if data from an iPad fails to load again.
Version: 1.2.3.13
Date: 02/27/19
InvoiceQue Screen:
Modified the Wellesley Fixed Width Invoice export. The report was adding a digit to the Bill No instead of incrementing the Bill No.
Version: 1.2.3.12
Date: 02/04/19
Hazard Listing and Hazard Screen:
Changed the software flow when you add a device from the Hazard screen or the Hazard Listing screen. This new flow will guide you through choosing which hazard your device should belong too and adding your device to the software. This is identical to the flow used when adding an existing device from a survey. NOTE: as part of this change the Hazard screen does not open if you open a piece of survey work. You can still access the hazard screen by opening a device from the Hazard Listing screen or choosing Add from the Hazard Listing screen.
Work History:
The software loads a change -add entry to the work history when you add a device. This was not happening if you added a device, proposed or existing, from a survey. This has now been added.
Test Signatures:
There was an issue where sometimes a signature was not applied to all tests for that facility for a day. This happened if you saved a signature for a test, and then on a subsequent test when asked "would you like to save a different signature" the user said "yes", then did NOT save a new signature. The next set of tests would not save the signature properly. This has been fixed.
When you do a test in a facility that has already had a test that day, the software pops a box and asks you if you would like to save a new signature. The text in this box was too wordy and not clear. This text on the buttons has been changed to be clearer and the text message on the box removed.
DCVA Test Screen:
On the DC Test Form a max value of 15 has been added for the fields Check Valve 1 DP and Check Valve No 2 DP. This has been done to prevent the TC #1 PSI and TC #4 PSI values from being entered into the check value fields.
Reports:
In the Dashboard changed the name of the report button ASR to Year End Report. Also added some logic so if the client is located in Massachusetts, the MA report is run, if the client is in New Hampshire, the NH report is run. If the client is in neither state, a box is popped and says, A Year End Report is not available in the software at this time, for your state.
Added 2019 as an option for the following reports: Devices Not Tested, ASR, Productivity Report.
Software function:
Modified the software's calculation of a test's frequency, to use the Hazard Level, as an additional parameter. i.e. You can now set a different test frequency for a low hazard RPZ versus a high hazard RPZ.
Comments
0 comments
Please sign in to leave a comment.