Compliance Sampling

1. When a Compliance Sampling task is opened it will appear something like below. Confirm all site and task information at the top of the screen is correct before proceeding.
   

If the task can be completed 

1. Select the green “Done” checkbox from the right side of the screen for samples that were collected. 
   Note: If applicable make sure to select a 24-hour composite sample start time
   

If the task cannot be completed 

1. Select the Yellow “CNP” checkbox from the left side of the screen for samples that were not collected. 
   Note: If applicable make sure to select a 24-hour composite sample start time
   
    
2. Select a reason from the option list menu.
   
    
3. After marking any collected samples as Done and any samples that could not be collected as CNP, click the ‘Submit’ button when finished.
   
    
4. The application will then return you to the Tasks screen. If there are samples that could not be collected and were not marked as complete, the task card will remain on the Tasks screen. If all samples have been collected, the task card will be removed from the Tasks screen.

Plant Monitoring 

1. When a Plant Monitoring task is opened it will appear something like below. Confirm all site and task information at the top of the screen is correct before proceeding.
   

If the task can be completed 

1. Enter the value for the parameter.
   
    

2. Select a unit from the option list, some parameters have default units.
   
   

    

3. When entering data using the units, “gallons” or “CU ft”, the average gallons per day will be displayed 
   Important: The value that is entered into the application is the value that is saved. If the math is incorrect on the average gallons per day, please send a ticket to support@wsoneplatform.com to let us know.
   
4. Once all values have been entered, select the ‘Submit’ button to complete the task. 
   
5. The application will then return you to the Tasks screen. If there are samples that could not be collected and were not marked as complete, the task card will remain on the Tasks screen. If all samples have been collected, the task card will be removed from the Tasks screen.
    

If the task cannot be completed 

1. Select the yellow "CNP” checkbox next to the parameter that cannot be collected. Note: This will gray out value and unit fields for the parameter
   

2. Select a reason from the option list menu. 
   

   

3. Click the ‘Submit’ button when finished.
   
4. The application will then return you to the Tasks screen. If there are samples that could not be collected and were not marked as complete, the task card will remain on the Tasks screen. If all samples have been collected, the task card will be removed from the Tasks screen.

House Keeping

House Keeping tasks are labeled with the “Plant Monitoring” because they are daily tasks. By default, all House Keeping tasks are grouped together on a single task card on the Task screen. Each section within the House Keeping task has its own station, which can be selected from the “Stations” menu.

Note: If you are looking for a specific House Keeping task, use the station filter to find the House Keeping items you need.

1. Open the House Keeping task from the Tasks screen. 
   Note: To determine if the task is daily House Keeping or daily effluent/influent, look at the listed station on the card. 
   
2. Confirm that the site and task information at the top of the screen is correct before proceeding.
   

Completing House Keeping items

1. For each item in each section of the House Keeping list, select “Yes,” “No,” or “N/A.” Use “N/A” when the item cannot be completed.
   
2. Click the “Submit” button when finished.
   
3. The application will then return you to the Tasks screen. If all items have been marked with “Yes,” “No,” or “N/A,” the task card will be removed from the Tasks screen. If any items have not been marked with an option, the task card will remain on the Tasks screen.